ETF2L – Latest activity in “3570k” https://staging.etf2l.org/forum/support/topic-22379/ Reply by raugnioz https://staging.etf2l.org/forum/support/topic-22379/page-1/?recent=402776#post=402776 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=22379&post=402776 Fri, 24 Aug 2012 00:07:59 +0200 Reply by ShiFt_02 https://staging.etf2l.org/forum/support/topic-22379/page-1/?recent=402776#post=402770 Quoted from Panromir
[...] Yup, I have that Motherboard as well, with the 3570k, works absolutely fine. Remember that even if a RAM stick is not noted in the "supported RAM" list, it will likely still work just fine. The 8pin connector is only required for higher load, the usual TDP of the 3570k under max load should be 77W, so a 4pin will be enough.
Yeah well it's like 50W without iGPU. Cheers]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=22379&post=402770 Thu, 23 Aug 2012 23:47:54 +0200 Reply by Panromir https://staging.etf2l.org/forum/support/topic-22379/page-1/?recent=402776#post=402754 Quoted from Davib
I have a 3570k and the exact same ram and I'm using the Gigabyte GA-Z77-D3H
Yup, I have that Motherboard as well, with the 3570k, works absolutely fine. Remember that even if a RAM stick is not noted in the "supported RAM" list, it will likely still work just fine. The 8pin connector is only required for higher load, the usual TDP of the 3570k under max load should be 77W, so a 4pin will be enough.]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=22379&post=402754 Thu, 23 Aug 2012 22:25:27 +0200 Reply by Davib https://staging.etf2l.org/forum/support/topic-22379/page-1/?recent=402776#post=401721 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=22379&post=401721 Sun, 19 Aug 2012 18:25:12 +0200 Created by ShiFt_02 https://staging.etf2l.org/forum/support/topic-22379/page-1/?recent=402776#post=401720 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=22379&post=401720 Sun, 19 Aug 2012 18:11:42 +0200