ETF2L – Latest activity in “pimp my config” https://staging.etf2l.org/forum/support/topic-12223/ Reply by Animal https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211017 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211017 Tue, 24 Aug 2010 06:46:17 +0200 Reply by Rocket https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211010 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211010 Tue, 24 Aug 2010 04:34:35 +0200 Reply by Warpten https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211008 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211008 Tue, 24 Aug 2010 04:00:40 +0200 Reply by Suub https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211005 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211005 Tue, 24 Aug 2010 03:53:37 +0200 Reply by Dr. Chris https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211001 Quoted from AnimaL
whats bad about sending more packets than server requests then?
Look into Source networking. You open up a needless overhead which never gets used (specifically, there is overhead for 44 more packets than you will ever use). This in turn can cause various problems, not least because the way that TF2 gets packet data is like this: send request for x packets for next n period of time (usually 1s) -> get y packets not like this like you seem to think: send request for x packets for next n period of time (usually 1s) -> server sends back "max 66/s" -> client adjusts parameters accordingly -> get x packets when you create that overhead multiple networking parameters (note, parameters != cvars) are changed, and none of them are told that the server will only send 66 updates, not the 100 they expect, because the client is never told that information, this can cause various problems and uses up needless resources. tl;dr overhead.]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211001 Tue, 24 Aug 2010 03:40:44 +0200 Reply by Animal https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=211000 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=211000 Tue, 24 Aug 2010 03:32:45 +0200 Reply by Dr. Chris https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210999 Quoted from Koeitje
Why? Putting them higher than tf2's max wont harm net performance.
Quoted from AnimaL
if fps >100 there is no bad side at all
incorrect.]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210999 Tue, 24 Aug 2010 03:29:34 +0200 Reply by Animal https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210997 Quoted from octochris
cl_cmdrate 100 cl_updaterate 100 rofl just seriously... if carnage plays with those settings he is completely fucking retarded
if fps >100 there is no bad side at all what saddens me is that there is no cl_smooth with is cmd only for pros u kno]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210997 Tue, 24 Aug 2010 03:23:14 +0200 Reply by Warpten https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210996 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210996 Tue, 24 Aug 2010 03:22:29 +0200 Reply by Koeitje https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210995 Quoted from octochris
cl_cmdrate 100 cl_updaterate 100 rofl just seriously... if carnage plays with those settings he is completely fucking retarded
Why? Putting them higher than tf2's max wont harm net performance. His interp is balls, but since he switched to demo I can understand.]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210995 Tue, 24 Aug 2010 03:16:06 +0200 Reply by Warpten https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210994 Quoted from octochris
cl_cmdrate 100 cl_updaterate 100 rofl just seriously... if carnage plays with those settings he is completely fucking retarded
downloaded it from complexity site:) EDIT: btw, trying, hope it works:)]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210994 Tue, 24 Aug 2010 03:14:23 +0200 Reply by Dr. Chris https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210993 cl_cmdrate 100 cl_updaterate 100 rofl just seriously... if carnage plays with those settings he is completely fucking retarded]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210993 Tue, 24 Aug 2010 03:12:12 +0200 Reply by Animal https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210992 generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210992 Tue, 24 Aug 2010 03:11:41 +0200 Created by Warpten https://staging.etf2l.org/forum/support/topic-12223/page-1/?recent=211017#post=210981 Quoted from .
// carnage fps config //Netcode Settings (change to your preference) rate 100000 cl_cmdrate 100 cl_interp_ratio 1 cl_updaterate 100 cl_interpolate 1 cl_interp .01 alias +scores "+showscores; timeleft" alias -scores "-showscores" bind tab "+scores" //Actual Video Settings mat_antialias 0 mat_forceaniso 0 mat_hdr_enabled 0 mat_hdr_level 0 mat_picmip 2 mat_trilinear 0 mat_vsync 0 r_rootlod 2 mat_monitorgamma "1.6" //Ingame Gamma Settings //FPS Settings fps_max 200 //Setting to 0 sets no max limit cl_detaildist "0" cl_detailfade "0" cl_drawmonitors "0" cl_ejectbrass "0" cl_forcepreload "1" cl_lagcomp_errorcheck "1" cl_lagcompensation "1" cl_downloadfilter "nosounds" cl_ejectbrass "0" cl_forcepreload 1 cl_phys_props_enable "0" cl_phys_props_max "0" cl_show_splashes "0" cl_smoothtime "0.01" cl_smooth 1 commentary 0 mat_aaquality "0" mat_autoexposure_max "0" mat_autoexposure_min "0" mat_bloomscale "0" mat_bufferprimitives "0" mat_bumpmap "0" mat_clipz "1" mat_compressedtextures "1" mat_diffuse "1" mat_disable_bloom "1" mat_disable_fancy_blending "1" mat_disable_lightwarp "1" mat_disable_ps_patch "1" mat_envmapsize "0" mat_excludetextures "1" mat_envmaptgasize "0" mat_fastspecular "1" mat_filterlightmaps "1" mat_filtertextures "1" mat_forceaniso "0" mat_forcehardwaresync "0" mat_forcemanagedtextureintohardware "0" mat_framebuffercopyoverlaysize "0" mat_hdr_enabled "0" mat_hdr_level "0" mat_hdr_manual_tonemap_rate "0" mat_mipmaptextures "0" mat_lightmap_pfms "0" mat_maxframelatency "0" mat_max_worldmesh_vertices "0" mat_parallaxmap "0" mat_picmip "2" mat_queue_mode "2" mat_reducefillrate "1" mat_shadowstate "0" mat_show_ab_hdr "0" mat_showlightmappage "-1" mat_specular "0" mat_texture_limit "-1" mat_trilinear "0" mat_use_compressed_hdr_textures "1" mat_showenvmapmask "0" mat_showlowresimage "0" mat_showmaterials "0" mat_showmaterialsverbose "0" mat_supportflashlight "0" mat_wateroverlaysize "0" mat_motion_blur_enabled "0" mat_motion_blur_percent_of_screen_max "0" mat_softwarelighting "0" mp_decals "0" muzzleflash_light "0" net_maxfragments "1280" net_maxfragments "1280" net_showevents "0" npc_height_adjust "1" props_break_max_pieces "0" props_break_max_pieces_perframe "0" r_3dnow "0" r_3dsky "0" r_PhysPropStaticLighting "0" r_WaterDrawReflection "1" r_WaterDrawRefraction "1" r_ambientboost "0" r_cheapwaterend "1" r_cheapwaterstart "1" r_decal_cullsize "0" r_decals "0" r_dopixelvisibility "0" r_drawbatchdecals "0" r_drawflecks "0" r_drawmodeldecals "0" r_drawmodelstatsoverlaymax "1.5" r_drawmodelstatsoverlaymin "0.01" r_drawspecificstaticprop "0" r_dynamic "0" r_eyeglintlodpixels "0" r_eyemove "0" r_eyes "0" r_eyeshift_x "0" r_eyeshift_y "0" r_eyeshift_z "0" r_eyesize "0" r_fastzreject "0" r_flashlightrendermodels "0" r_unloadlightmaps "1" r_flashlightrenderworld "0" r_flex "0" r_forcewaterleaf "0" r_lightaverage "0" r_lod "2" r_staticprop_lod "4" r_maxdlights "0" r_maxmodeldecal "0" r_maxnewsamples "0" r_maxsampledist "0" r_minnewsamples "0" r_mmx "1" r_norefresh "0" r_occlusion "0" r_renderoverlayfragment "0" r_queued_decals "1" r_rootlod "2" r_ropetranslucent "0" r_shadowmaxrendered "32" r_shadowrendertotexture "0" r_shadows "0" r_spray_lifetime "0.1" r_sse "1" r_sse2 "1" r_teeth "0" r_staticpropinfo "0" r_updaterefracttexture "0" r_updaterefracttexture "0" r_visualizeproplightcaching "1" r_waterdrawreflection "0" r_waterforceexpensive "0" r_waterforcereflectentities"0" rope_averagelight "0" rope_collide "0" rope_shake "0" rope_smooth "0" rope_smooth_enlarge "0" rope_smooth_maxalpha "0" rope_smooth_maxalphawidth "0" rope_smooth_minalpha "0" rope_smooth_minwidth "0" rope_subdiv "0" rope_wind_dist "0" //Blood settings violence_ablood 0 violence_agibs 0 violence_hblood 0 violence_hgibs 0 //ragdoll cl_ragdoll_physics_enable 1 // Disables dead animations and bodies cl_ragdoll_collide 0 // Ragdoll collisions cl_ragdoll_forcefade 0 cl_ragdoll_fade_time 10 // Time until ragdolls disappear ragdoll_sleepaftertime 5 exec hitsound.cfg
Before telling me this: "get fps config" I used fps cfg before, but this one is smooth and I like the graphs...But my tf2 keeps crashing all the time... Maybe there are few setting, which can be changed in this config, without changing the looks(for example, I removed shadows). I haven't tried total tf2 re-install, but i will tomorrow(I keep only prec, cfg and hud). So maybe someone who knows that kinda stuff, could take a look at it and help me out. Cheers]]> generator=rsdiscuss&baseurl=https://staging.etf2l.org&feed=forum&forum=support&topic=12223&post=210981 Tue, 24 Aug 2010 02:28:01 +0200